\nArizona Metals Corp. (TSXV:AMC, OTCQB:AZMCF) (the \u201cCompany\u201d or \u201cArizona Metals\u201d) announces that drilling is currently underway for the Kay Mine Phase 2 expansion drill program (Figure 1). Drilling under the fully-funded Phase 2 program will consist of up to 11,000 m in 29 core drill holes, to test for new VMS lenses in anticlinal hinge zones identified to the north and south of recent drilling, as well as the up-plunge and down-plunge extensions of known hinges (Figure 2). Drilling will begin at the Kay Mine targets and progress to targets on strike (north and south) of the Kay Mine, and then to Central and Western targets as permitting is completed(Figure 3). Permitting is currently underway for these targets and is progressing well.\n<\/p>\n
This press release features multimedia. View the full release here: https:\/\/www.businesswire.com\/news\/home\/20210107005253\/en\/<\/a><\/p>\n Figure 1. Drill rig turning at start of Kay Mine Phase 2 expansion program (Jan 6, 2021) (Photo: Business Wire)<\/p>\n<\/div>\n Marc Pais, CEO, commented,<\/b> \u201cWe are pleased to have commenced the Phase 2 drill program, which we believe has the potential to significantly expand the scope and scale of the Kay project, well beyond the boundaries of the 5.8 million tonne historic estimate<\/i>* outlined by Exxon Minerals in 1982. Our successful Phase 1 drill program greatly increased our confidence in the model. Drilling encountered massive sulphides in 19 of 20 holes. Recently completed spectral alteration analyses of the Kay Mine Phase 1 program drill core, along with downhole EM geophysical surveying, has given us an even stronger understanding of the folding of the Kay deposit at depth. This work has identified a number of high priority drill targets, which we believe have the potential to host additional VMS lenses, as well as wide mineralized hinge zones, similar to the 43 m of 3.9% CuEq (incl. 15 m of 6.7% CuEq) encountered in hole 13.<\/i>\u201d\n<\/p>\n About Arizona Metals Corp<\/b><\/p>\n \nArizona Metals Corp owns 100% of the Kay Mine Property in Yavapai County, which is located on a combination of patented and BLM claims totaling 1,300 acres that are not subject to any royalties. An historic estimate by Exxon Minerals in 1982 reported a \u201cproven and probable reserve of 6.4 million short tons at a grade of 2.2% copper, 2.8 g\/t gold, 3.03% zinc, and 55 g\/t silver.\u201d The historic estimate at the Kay Mine was reported by Exxon Minerals in 1982. (Fellows, M.L., 1982, Kay Mine massive sulphide deposit: Internal report prepared for Exxon Minerals Company)\n<\/p>\n \n*The Kay Mine historic estimate has not been verified as a current mineral resource. None of the key assumptions, parameters, and methods used to prepare the historic estimate were reported, and no resource categories were used. Significant data compilation, re-drilling and data verification may be required by a Qualified Person before the historic estimate can be verified and upgraded to be a current mineral resource. A Qualified Person has not done sufficient work to classify it as a current mineral resource, and Arizona Metals is not treating the historic estimate as a current mineral resource.\n<\/p>\n \nThe Kay Mine is a steeply dipping VMS deposit that has been defined from a depth of 60 m to at least 900 m. It is open for expansion on strike and at depth.\n<\/p>\n \nThe Company also owns 100% of the Sugarloaf Peak Property, in La Paz County, which is located on 4,400 acres of BLM claims. Sugarloaf is a heap-leach, open-pit target and has a historic estimate of \u201c100 million tons containing 1.5 million ounces gold\u201d at a grade of 0.5 g\/t (Dausinger, N.E., 1983, Phase 1 Drill Program and Evaluation of Gold-Silver Potential, Sugarloaf Peak Project, Quartzsite, Arizona: Report for Westworld Inc.)\n<\/p>\n \nThe historic estimate at the Sugarloaf Peak Property was reported by Westworld Resources in 1983. The historic estimate has not been verified as a current mineral resource. None of the key assumptions, parameters, and methods used to prepare the historic estimate were reported, and no resource categories were used. Significant data compilation, re-drilling and data verification may be required by a Qualified Person before the historic estimate can be verified and upgraded to a current mineral resource. A Qualified Person has not done sufficient work to classify it as a current mineral resource, and Arizona Metals is not treating the historic estimate as a current mineral resource.\n<\/p>\n \nThe Qualified Person who reviewed and approved the technical disclosure in this release is David Smith, CPG.\n<\/p>\n Quality Assurance\/Quality Control<\/b><\/p>\n \nAll of Arizona Metals\u2019 drill sample assay results have been independently monitored through a quality assurance\/quality control (\u201cQA\/QC\u201d) protocol which includes the insertion of blind standard reference materials and blanks at regular intervals. Logging and sampling were completed at Arizona Metals\u2019 core handling facilities located in Anthem and Black Canyon City, Arizona. Drill core was diamond sawn on site and half drill-core samples were securely transported to ALS Laboratories\u2019 (\u201cALS\u201d) sample preparation facility in Tucson, Arizona. Sample pulps were sent to ALS\u2019s labs in Vancouver, Canada, for analysis.\n<\/p>\n \nGold content was determined by fire assay of a 30-gram charge with ICP finish (ALS method Au-AA23). Silver and 32 other elements were analyzed by ICP methods with four-acid digestion (ALS method ME-ICP61a). Over-limit samples for Au, Ag, Cu, and Zn were determined by ore-grade analyses Au-GRA21, Ag-OG62, Cu-OG62, and Zn-OG62, respectively.\n<\/p>\n \nALS Laboratories is independent of Arizona Metals Corp. and its Vancouver facility is ISO 17025 accredited. ALS also performed its own internal QA\/QC procedures to assure the accuracy and integrity of results. Parameters for ALS\u2019 internal and Arizona Metals\u2019 external blind quality control samples were acceptable for the samples analyzed. Arizona Metals is not aware of any drilling, sampling, recovery, or other factors that could materially affect the accuracy or reliability of the data referred to herein.\n<\/p>\n This press release contains statements that constitute \u201cforward-looking information\u201d (collectively, \u201cforward-looking statements\u201d) within the meaning of the applicable Canadian securities legislation, All statements, other than statements of historical fact, are forward-looking statements and are based on expectations, estimates and projections as at the date of this news release. Any statement that discusses predictions, expectations, beliefs, plans, projections, objectives, assumptions, future events or performance (often but not always using phrases such as \u201cexpects\u201d, or \u201cdoes not expect\u201d, \u201cis expected\u201d, \u201canticipates\u201d or \u201cdoes not anticipate\u201d, \u201cplans\u201d, \u201cbudget\u201d, \u201cscheduled\u201d, \u201cforecasts\u201d, \u201cestimates\u201d, \u201cbelieves\u201d or \u201cintends\u201d or variations of such words and phrases or stating that certain actions, events or results \u201cmay\u201d or \u201ccould\u201d, \u201cwould\u201d, \u201cmight\u201d or \u201cwill\u201d be taken to occur or be achieved) are not statements of historical fact and may be forward-looking statements. Forward-looking statements contained in this press release include, without limitation, statements regarding the resumption of drilling and the effects of the COVID-19 pandemic on the business and operations of the Company. In making the forward- looking statements contained in this press release, the Company has made certain assumptions. Although the Company believes that the expectations reflected in forward-looking statements are reasonable, it can give no assurance that the expectations of any forward-looking statements will prove to be correct. Known and unknown risks, uncertainties, and other factors which may cause the actual results and future events to differ materially from those expressed or implied by such forward-looking statements. Such factors include, but are not limited to: availability of financing; delay or failure to receive required permits or regulatory approvals; and general business, economic, competitive, political and social uncertainties. Accordingly, readers should not place undue reliance on the forward-looking statements and information contained in this press release. Except as required by law, the Company disclaims any intention and assumes no obligation to update or revise any forward-looking statements to reflect actual results, whether as a result of new information, future events, changes in assumptions, changes in factors affecting such forward- looking statements or otherwise.<\/i><\/p>\n NEITHER THE TSX VENTURE EXCHANGE (NOR ITS REGULATORY SERVICE PROVIDER) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE<\/i><\/p>\n Not for distribution to US newswire services or for release, publication, distribution or dissemination directly, or indirectly, in whole or in part, in or into the United States<\/b><\/p>\n View source version on businesswire.com: <\/span>https:\/\/www.businesswire.com\/news\/home\/20210107005253\/en\/<\/a><\/span><\/p>\n \nFor further information, please contact: KEYWORDS:<\/b> North America Canada<\/p>\n INDUSTRY KEYWORDS:<\/b> Natural Resources Other Natural Resources Mining\/Minerals<\/p>\n![\"Figure](\"https:\/\/mms.businesswire.com\/media\/20210107005253\/en\/850737\/4\/Kay_mine_phase_2_rig_turning_for_PR_jan_2021.jpg\")
<\/p>\n<\/p>\n
\n
Marc Pais
\n
President and CEO Arizona Metals Corp.
\n
(416) 565-7689
\n
mpais@arizonametalscorp.com
\n<\/a>
www.arizonametalscorp.com
\n<\/a>
https:\/\/twitter.com\/ArizonaCorp<\/a><\/p>\n
![\"Photo\"](\"https:\/\/mms.businesswire.com\/media\/20210107005253\/en\/850737\/3\/Kay_mine_phase_2_rig_turning_for_PR_jan_2021.jpg\")
<\/td>\n<\/tr>\n![\"Photo\"](\"https:\/\/mms.businesswire.com\/media\/20210107005253\/en\/850738\/3\/Dec_9_SRK_Section_Draft_3.jpg\")
<\/td>\n<\/tr>\n![\"Photo\"](\"https:\/\/mms.businesswire.com\/media\/20210107005253\/en\/850739\/3\/Sept_2020_Fraser_Filter_map_V3.jpg\")
<\/td>\n<\/tr>\n